Table of Contents
Advertisement
Setting the Quick Setting Wizard Display to ON/OFF
When the power switch of the instrument is set to ON, the <Welcome to Easy Setup Wizard!> screen is
normally displayed and you can set the measurement conditions and calibrate the instrument step by step by
following the instructions on the screen. This section describes the procedure to set whether to display this
<Welcome to Easy Setup Wizard!> screen.
[Setting Procedure]
1. Use the
or
cursor to "Wizard Screen" and then press the [OK/
Edit] button.
The <Wizard Screen Display Settings> screen is displayed.
2. Use the
or
cursor to the desired item.
Settings
OFF : Do not display the <Welcome to Easy Setup
Wizard!> screen the next time the instrument is
turned ON (the power switch is set to ON).
ON
: Display the <Welcome to Easy Setup Wizard!>
screen the next time the instrument is turned ON
(the power switch is set to ON).
When OFF is selected, the <Welcome to Easy Setup
Memo
Wizard!> screen is not displayed after the power switch of
the instrument is set to ON.
If you have set automatic white calibration to ON, white
calibration (100% Calibration) is performed automatically
after the instrument is turned ON, and then the <Sample>
screen is displayed. This allows you to start measurement
quickly. This function is useful when you always perform
measurement using the same condition settings.
For the procedure to enable automatic white calibration,
refer to page 93.
3. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Screen Option Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Screen Option Settings>
screen without changing the setting.
Whether to display the wizard can also be set by selecting
Memo
or unselecting "Yes" for "Display Quick Setting Wizard
every time." on the <Welcome to Easy Setup Wizard!>
screen.
E102
Start the procedure from the <Screen Option Settings> screen.
button of the cross key to move the
button of the cross key to move the
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
