Konica Minolta cm-5 Instruction Manual page 75

Illuminant 1
Select the illuminant used to measure colorimetric data.
[Setting Procedure]
1. Use the or button of the cross key to move the
cursor to the desired "Illuminant 1" and then press the
[OK/Edit] button.
The <Primary Illuminant> screen is displayed.
2. Use the or button of the cross key to move the
cursor to the desired item.
Settings
 A Standard illuminant A (Incandescent lamp, Color
temperature: 2856K)
 C Illuminant C; (Daylight, The relative value of the
spectral distribution in the ultraviolet region is
small; Color temperature: 6774K)
 D65 Standard illuminant D65 (Daylight, Color
temperature: 6504K)
 D50 Standard illuminant D50 (Daylight, Color
temperature: 5003K)
 ID65 Indoor daylight illuminant ID65 (Daylight after
passing through window glass, Color temperature:
6504K)
 ID50 Indoor daylight illuminant ID50 (Daylight after
passing through window glass, Color temperature:
5003K
 F2 Cool white (fluorescent lamp)
 F6 Cool white (fluorescent lamp)
 F7 Color rendering A daylight white (fluorescent
lamp)
 F8 Color rendering AAA natural white (fluorescent
lamp)
 F10 3-band type natural white (fluorescent lamp)
 F11 3-band type cool white (fluorescent lamp)
 F12 3-band type warm white (fluorescent lamp)
Start the procedure from the <Color Settings> screen.
2
E73