Batch Setting Of Conditions - Konica Minolta cm-5 Instruction Manual

Batch Setting of Conditions

You can save various conditions (display conditions, measurement conditions, etc.) as a file in advance and set
the conditions of the instrument all at once by loading the file.
[Preparation]
1. Press the [MENU] button.
The <Configuration> screen is displayed.
2. Use the or
move the cursor to "Output" and then press the [OK/
Edit] button.
The <Output Settings> screen is displayed.
3. Connect a USB memory device to the USB connection
terminal, use the
move the cursor to "Save Condition" and then press the
[OK/Edit] button.
The <Save Condition File> screen is displayed with a
suggested file name being entered.
The "Save Condition" option can be selected only when a
Notes
USB memory device has been connected.
4. To change the file name, use the
cross key to move the cursor to "File Name" and then
press the [OK/Edit] button.
The <Edit Name> screen is displayed.
A USB keyboard can also be used to input file names. For
Memo
information on connecting a USB keyboard, refer to page
143 "Connecting a USB Keyboard".
E108
and or button of the cross key to
or button of the cross key to
or button of the