Optional Accessories - Konica Minolta cm-5 Instruction Manual

Optional Accessories

You may purchase the following accessories if necessary.
Petri Dish Measurement Full Set CM-A205
Petri Dish: CM-A128
Zero Calibration Box: CM-A124
Used to perform zero calibration.
Mini Petri Dish Measurement Full Set CM-A164
Mini Petri Dish: CM-A157
Zero Calibration Box: CM-A124
Used to perform zero calibration.
Instructions and notes regarding the use of the Mini Petri Dish CM-A157 and its accessories are the same as for the
Notes
Petri Dish CM-A128 unless otherwise specified.
Target Mask (for Petri Dish):
CM-A203
Used to perform reflectance
measurement using a Petri Dish.
White Calibration Plate:
CM-A210
(with CD-ROM containing calibration
data and data-setting software)
Can be used in place of the built-in
White Calibration Plate to perform
white calibration.
Target Mask (for Mini Petri
Dish): CM-A158
Used to perform reflectance
measurement using a Mini Petri
Dish.
White Calibration Plate:
CM-A210
(with CD-ROM containing calibration
data and data-setting software)
Can be used in place of the built-in
White Calibration Plate to perform
white calibration.
Calibration Glass
(for Petri Dish): CM-A212
Used for calibration for reflectance
measurement using a Petri Dish.
Accessory Case: CM-A193
Calibration Glass
(for Mini Petri Dish): CM-A159
Used for calibration for reflectance
measurement using a Mini Petri
Dish.
Accessory Case: CM-A193
1
E11