Konica Minolta cm-5 Instruction Manual page 111

5. Use the or and
to move the cursor around the characters and then
press the [OK/Edit] button.
The selected character is displayed in the text box.
6. Repeat Step 5 until you have entered the necessary
characters.
• You can use the or
the blue box cursor on the text box. In this status, you can
move the character position and modify the character by
pressing the or
• To delete the character to the left of the cursor in the text
box, press the [CAL] button.
• Up to 20 characters can be used.
7. When you are finished entering characters, use the
or and or buttons of the cross key to move the
cursor to "Save" and then press the [OK/Edit] button.
The settings are confirmed and the screen returns to the
<Save Condition File> screen.
If you press the [Back] button during the setting, "Do you
Memo
want to save the changes?" is displayed. When you place
the cursor on "OK" and press the [OK/Edit] button, the
setting details are confirmed and the screen returns to the
<Save Condition File> screen. When you place the cursor
on "Cancel" and press the [OK/Edit] button, the settings
are not changed and the screen returns to the <Save
Condition File> screen.
8. To accept the displayed file name, use the
button of the cross key to move the cursor to
Condition" and then press the [OK/Edit] button.
• The <Saving...> screen is displayed.
• When the saving is complete, the screen returns to the
<Output Settings> screen.
A condition setting file stores the parameters of the
Memo
following screens currently set in the instrument.
or buttons of the cross key
button of the cross key to move
button of the cross key.
or
"Save
2
E109