Konica Minolta cm-5 Instruction Manual page 92

4. When you finish all settings, press the
[MENU] button of the cross key to move the cursor on
"Save", and then press the [OK/Edit] button.
The setting is confirmed and the screen returns to the <Target
Data Function> screen.
If you press the [Back] button during the setting, the
Memo
<Save Confirmation> screen is displayed. When you
place the cursor on "OK" and press the [OK/Edit] button,
the setting details are confirmed. When you place the
cursor on "Cancel" and press the [OK/Edit] button, the
setting details are not changed. After that, the screen
returns to the <Target Data Function> screen.
E90
button or