Konica Minolta cm-5 Instruction Manual page 126

6. When you are finished entering characters, press
[MENU] button, move the cursor to "Save" and then
press the [OK/Edit] button.
The settings are confirmed and the screen returns to the
<Save Sample Data> screen.
• If you press the [Back] button during the setting, "Do
Memo
you want to save the changes?" is displayed. If you then
place the cursor on "OK" and press the [OK/Edit]
button, the setting details are confirmed and the screen
returns to the <Save Sample Data> screen; if you place
the cursor on "Cancel" and press the [OK/Edit] button,
the setting details are not changed and the screen returns
to the <Save Sample Data> screen.
• Disconnect any USB keyboards connected to the
instrument.
7. Connect the USB memory device. To accept the
displayed file name, use the
key to move the cursor to
Edit] button.
The <Saving...> screen is displayed.
When the saving is complete, the screen returns to the
<Sample> detail screen.
When the file format is set to the CM-S100w format,
Memo
measured color difference data is saved along with set
values. For details regarding file format settings, refer to
page 141.
E124
or button of the cross
and then press the [OK/