Konica Minolta cm-5 Instruction Manual page 151

2. Use the or and
to move the cursor to "Output" and then press the [OK/
Edit] button.
The <Output Settings> screen is displayed.
3. Use the or button of the cross key to move the
cursor to "Serial Printer Settings" and then press the
[OK/Edit] button.
The <Serial Printer Settings> screen is displayed.
4. Use the or button of the cross key to move the
cursor to "Auto Print" and then press the [OK/Edit]
button.
The <Auto Print Configuration> screen is displayed.
5. Use the or button of the cross key to move the
cursor to the desired item.
Settings
 O FF: Disable Auto Print.
 O N: Enable Auto Print. The
displayed on the screen.
6. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Serial Printer Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Serial Printer Settings>
screen without changing the setting.
or buttons of the cross key
(Auto Print ON) icon is
4
E149