Konica Minolta cm-5 Instruction Manual page 72

Color Index
Select the index (WI, YI, etc.) to be used.
This screen is available when the user index has been set with the optional Color Management Software
SpectraMagic™ NX (CM-S100w) in advance.
[Setting Procedure]
1. Use the or
cursor to "Color Index" and then press the [OK/Edit]
button.
The <Color Index> screen is displayed.
A scroll bar to the right of the <Color Index> screen,
signifies that some color indexes cannot be displayed on the
screen.
2. Use the or
cursor to the desired item.
Settings
Move the cursor up from the top of the list, or down from the
bottom of the list, to display those indexes that cannot be
displayed on the screen.
 WI ASTM E313-73: Whiteness index (ASTM E313-73)
 WI ASTM E313-96: Whiteness index (ASTM E313-96)
 WI Hunter: Whiteness index (Hunter)
 YI ASTM E313-73: Yellowness index (ASTM E313-73)
 YI ASTM E313-96: Yellowness index (ASTM E313-96)
 YI ASTM D1925: Yellowness index (ASTM D1925)
 B ASTM E313-73
 ISO Brightness
 None
• A value for WI ASTM E313-73 is displayed only
Memo
when observer 2° and illuminant "C" are selected.
• A value for WI ASTM E313-96 is displayed only
when illuminant "C", "D50" or "D65" is selected.
• A value for WI Hunter is displayed only observer
2° and illuminant "C" are selected.
• A value for YI ASTM E313-73 is displayed only
when observer 2° and illuminant "C" are selected.
• A value for YI ASTM E313-96 is displayed only
when illuminant "C"/"D65" are selected.
• A value for YI YI D1925 is displayed only when
illuminant "C" is selected.
• A value for B ASTM E313-73 is displayed only
when observer 2° and illuminant "C" are selected.
E70
Start the procedure from the <Color Settings> screen.
button of the cross key to move the
button of the cross key to move the