Konica Minolta cm-5 Instruction Manual page 141

3. On the <Target> detail screen, press the [OK/Edit]
button.
The <Target Data Function> screen is displayed.
4. Use the or button of the cross key to select the
"Current" tab, use the
cursor to "Tolerance", and then press the [OK/Edit]
button.
The <Tolerance> screen is displayed.
5. Make sure that the values are set properly, and then
press the [Back] button twice.
The <Target> screen is displayed.
6. Press the [Target/Sample] button.
The <Sample> screen is displayed.
7. Set the specimen on the Target Mask or Transmittance
Specimen Chamber according to the measurement type,
and press the [MEAS] button.
The specimen is measured and the results are displayed on the
screen.
or button to move the
4
E139