Konica Minolta cm-5 Instruction Manual page 83

2.
The <Target List> screen will appear.
3. Use the or button of the cross
key to select a target to use for
statistical calculations and then press
the [OK/Edit] button to confirm the
selection.
• A check mark will appear in the box to
the left of the target name when a target
is selected.
• Statistics can be performed using only
targets measured under the same
measurement conditions (measurement
type, measurement area, SCI/SCE
setting).
• To deselect a target with a check mark,
move the cursor to the target and then
press the [OK/Edit] button again.
• To select all targets shown on the
screen, use the or
cross key to move the cursor to the
"Page" button and then press the [OK/
Edit] button. Check marks will appear
to the left of all targets shown.
• Use the or button of the cross
key to move to other pages in
instrument memory. Selected data will
remain selected even if pages are
changed.
button of the
2
E81