Konica Minolta cm-5 Instruction Manual page 106

Setting the Display Language
The display language can be changed from the factory-set language. Available languages are: English, Japanese,
German, French, Spanish, Italian, Chinese, and Portuguese.
The language is factory-set to "English".
Memo
When the backup battery of the instrument has gone dead, the display language is reset to "English" regardless of
Notes
the factory-set language.
[Setting Procedure]
1. Use the or
cursor to "Language" and then press the [OK/Edit]
button.
The <Language> screen is displayed. The scroll bar at the
right on the <Language> screen shows that there are
additional language settings that cannot fit on the screen.
2. Use the or
cursor to the desired item.
Moving the cursor past the top or bottom of the list will show
additional language settings that cannot fit on the screen.
3. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Screen Option Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Screen Option Settings>
screen without changing the setting.
E104
Start the procedure from the <Screen Option Settings> screen.
button of the cross key to move the
button of the cross key to move the