Konica Minolta cm-5 Instruction Manual page 98

Setting the Custom Data Screen to ON/OFF
The measurement result display function allows you to switch between various screens including "Absolute" or
"Difference". You can add the "Custom Data" screen showing your desired items to these screens.
This section describes the procedure to set whether to display this "Custom Data" screen.
To set the items displayed on the "Custom" screen, you need to use the optional Color Management Software
Memo
SpectraMagic™ NX. For details, refer to the instruction manual of SpectraMagic™ NX.
[Setting Procedure]
1. Use the or
cursor to "Custom Data View Settings" and then press
the [OK/Edit] button.
The <Custom Data View Settings> screen is displayed.
2. Press the [OK/Edit] button.
The <Show Custom Data Screen> screen is displayed.
3. Use the or
cursor to the desired item.
Settings
 OFF : The "Custom Data" screen is not displayed as the
measurement result screen.
 ON : The "Custom Data" screen is displayed as one of
the measurement result screens.
4. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Custom Data View Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Custom Data View
Settings> screen without changing the setting.
E96
Start the procedure from the <Graph and Data Settings> screen.
button of the cross key to move the
button of the cross key to move the