Konica Minolta cm-5 Instruction Manual page 67

Manual Measurement (1-30)
Specify the number of measurements for manual averaging.
The average of the data obtained from the measurements conducted with the presses of the [MEAS] button for
the specified number of times is determined as sample data.
[Setting Procedure]
1. Use the or button of the cross key to move the
cursor to "Manual Measurement (1-30)" and then press
the [OK/Edit] button.
Above and below the cursor  and  are displayed.
2. Use the or button of the cross key to specify a
value.
Settings
 1 to 30 times:
Specify the number of measurements, from 1 to 30 times, to
perform when using manual averaging.
3. Press the [OK/Edit] button.
The selection is confirmed.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Measurement Options>
screen without changing the setting.
Start the procedure from the <Measurement Options> screen.
2
E65