Saving Data Onto A Usb Memory Device - Konica Minolta cm-5 Instruction Manual

Saving Data onto a USB Memory Device

Save sample data stored in the instrument onto the USB memory device.
You need to connect a USB memory device to the instrument in advance. For the connection of a USB memory
device, refer to page 141 "Connecting a USB Memory".
[Operating Procedure]
1. Use the or
"All" tab, use the
"Save", and then press the [OK/Edit] button.
2.
The < Sample List > screen appears, with all samples
initially selected (check marks shown in the box to the left of
the sample name.
• To deselect a sample with a check mark, move the cursor to
the sample and then press the [OK/Edit] button.
• To deselect all samples shown on the screen, use the
button of the cross key to move the cursor to the "Page"
button and then press the [OK/Edit] button. The check
marks to the left of all samples shown will disappear.
• Use the or
pages in instrument memory. Selected data will remain
selected even if pages are changed.
3.
When selection/deselection of samples has been completed,
use the or
the "Save" button and then press the [OK/Edit] button.
The <Save Sample Data> screen is displayed with a
suggested file name shown.
4. To change the file name, use the
cross key to move the cursor to "File Name" and then
press the [OK/Edit] button.
The <Edit Name> screen is displayed.
E130
Start the procedure from the <Sample Data Function> screen.
button of the cross key to select the
or button to move the cursor to
button of the cross key to move to other
button of the cross key to move the cursor to
or
or
button of the