Konica Minolta cm-5 Instruction Manual page 91

Default Tolerance Setting
This instrument allows tolerance setting for individual target color data. Before setting such individual
tolerance, the instrument is set with default tolerance. This section describes the procedure to set default
tolerance.
• Before tolerance is specified for individual target colors, the instrument is set with default tolerance.
Memo
• When you change default tolerance after tolerance has been set for individual target colors, the tolerance
specified for these target colors will not be changed.
• With the optional Color Management Software "SpectraMagic™ NX", you can set or use the color difference
tolerance easily.
• The default tolerance setting items are the same as those of the color space or index currently selected for the
display conditions.
[Setting Procedure]
1. Use the or button of the cross key to select the
"All" tab, use the
"Tolerance (Def.)", and then press the [OK/Edit]
button.
The <Tolerance (Def.)> screen is displayed.
2. Use the and button of the cross key
move the cursor to the desired item.
3. Press the [OK/Edit] button to change the details.
• When the selected item is not currently checked, pressing
the [OK/Edit] button causes the item to be checked, and
you can change the setting value.
• When the selected item is not currently checked, pressing
the [OK/Edit] button makes the item be checked. Press the
button of the cross key to move the blue box cursor to
the setting value area. When you press the [OK/Edit]
button, the cursor appears on the value. Press the
button of the cross key to change the value.
You can move the cursor between the digits of the value by
Memo
pressing the
Settings
 0.1 to 20.0
* Settings of x and y are 0.001 to 0.200.
• You need to press the [OK/Edit] button to confirm the
change every time you change the setting of an item.
Start the procedure from the <Target Data Function> screen.
or button to move the cursor to
or button of the cross key.
or to
or
2
E89