Annual Service Recalibration Recommendation Message - Konica Minolta cm-5 Instruction Manual

Annual Service Recalibration Recommendation
Message
When about one year passes after the factory shipment or the calibration service (or maintenance) conducted by
KONICA MINOLTA-authorized service facility, the CM-5 shows a message "WR050 Time for Periodic
Calibration. Please contact closest Service Center." at start-up to recommend annual service recalibration.
You can set this message display to be shown, or to be hidden so that the message is not displayed even when the
recommended recalibration time comes.
Although the annual service recalibration recommendation message display can be hidden, it is recommended to
Notes
accept our recalibration service.
The message display is set to "Show" before the factory shipment.
Memo
[Operating Procedure]
1. Press the [MENU] button.
The <Configuration> screen is displayed.
2. Use the or and
to move the cursor to "System" and then press the [OK/
Edit] button.
The <System Settings> screen is displayed with "Periodic
Calibration".
When the periodic calibration notification message is set to
Memo
ON, the message is displayed when the specified day
comes.
The date of the annual recalibration service is specified
before the factory shipment or during KONICA MINOLTA
calibration service (or maintenance) and you cannot change
it.
3. Use the or button of the cross key to move the
cursor to "Periodic Message Settings" and then press
the [OK/Edit] button.
The <Periodic Message Settings> screen is displayed.
or buttons of the cross key
4
E153