Konica Minolta cm-5 Instruction Manual page 85

Edit Name
Name the target color data.
[Procedure]
1. Use the or button of the cross key to select the
"Current" tab, use the
cursor to "Edit Name", and then press the [OK/Edit]
button.
The <Edit Name> screen is displayed.
A USB keyboard can also be used to input file names. For
Memo
information on connecting a USB keyboard, refer to page
143 "Connecting a USB Keyboard".
2. Use and or
move the cursor around the characters and then press
the [OK/Edit] button.
• Up to 20 characters can be used.
• The selected character is displayed in the text box.
3. Repeat Step 2 until you have entered the necessary
characters.
• You can use the or
the blue box cursor on the text box.
In this status, you can move the character position and
modify the character by pressing the
cross key.
• To delete the character to the left of the cursor in the text
box, press the [CAL] button.
4. When you are finished entering characters, use
or and buttons of the cross key to move the
cursor to "Save" and then press the [OK/Edit] button.
The setting is confirmed and the screen returns to the
<Target> screen.
Start the procedure from the <Target Data Function> screen.
or button to move the
and buttons of the cross key to
button of the cross key to move
or button of the
and
2
E83