Konica Minolta cm-5 Instruction Manual page 100

4. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Color Assessment Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Color Assessment
Settings> screen without changing the setting.
5. Press the [Back] button.
The screen returns to the <Graph and Data Settings>
screen.
Setting the Spectral Graph Data Display
The measurement result display function allows you to switch between various screens including "Absolute" and
"Difference", and the "Spectral" screen which shows a spectral graph is one of them.
This section describes the procedure to set whether to show spectral data on this "Spectral" screen.
[Setting Procedure]
1. Use the or
cursor to "Spectral Graph Settings" and then press the
[OK/Edit] button.
The <Spectral Graph Settings> screen is displayed.
2. Use the or
cursor to "Spectral Data Display" and then press the
[OK/Edit] button.
The <Spectral Data Display> screen is displayed.
E98
Start the procedure from the <Graph and Data Settings> screen.
button of the cross key to move the
button of the cross key to move the