Print - Konica Minolta cm-5 Instruction Manual

Print

Print the sample data.
You need to connect the instrument to a serial printer in advance. For instructions on how to connect the
instrument and a serial printer, refer to page 145 "Printer Connection".
• If proper connection is not established, you cannot print data.
Notes
• Even if the connection has been correctly established, printing may fail for reasons such as the printer being
turned off when printing is attempted.
[Operating Procedure]
1. Use the or button of the cross key to select the
"Current" tab, and then use the
move the cursor to "Print".
2. Press the [OK/Edit] button. The <Print Sample Data>
screen is displayed and the data is printed out from the
connected printer.
When the printing is complete, the screen returns to the
<Sample> detail screen.
The <Print Sample Data> screen is displayed even when
Notes
data will not be printed properly due to an improper printer
connection or other problems.
Start the procedure from the <Sample Data Functions> screen.
or button to
3
E127