Konica Minolta cm-5 Instruction Manual page 88

4. When you finish all settings, press the
[MENU] button of the cross key to move the cursor on
"Save", and then press the [OK/Edit] button.
The setting is confirmed and the screen returns to the <Target
Data Function> screen.
If you press the [Back] button during the setting, the
Memo
<Save Confirmation> screen is displayed. When you
place the cursor on "OK" and press the [OK/Edit] button,
the setting details are confirmed. When you place the
cursor on "Cancel" and press the [OK/Edit] button, the
setting details are not changed. After that, the screen
returns to the <Target Data Function> screen.
Delete
Delete the target color data.
When the data is protected, you cannot select "Delete" on the <Target Data Function> screen.
Notes
[Procedure]
1. Use the or
"Current" tab, use the
cursor to "Delete", and then press the [OK/Edit] button.
The <Delete Target Data> screen is displayed.
2. Use the button of the cross key to move the cursor to
"OK" and press the [OK/Edit] button. The data is
deleted.
• When the deletion is complete, the screen returns to the
<Target> screen.
• When you place the cursor on "Cancel" and press the [OK/
Edit] button, the deletion is canceled and the screen returns
to the <Target Data Function> screen.
E86
Start the procedure from the <Target Data Function> screen.
button of the cross key to select the
or button to move the
button or