Konica Minolta cm-5 Instruction Manual page 93

Data Protection
You can specify data protection so that the saved target color setting will not be deleted or changed by accident.
When the data protection is set, you cannot select "Edit Name", "Tolerance", "Delete", "Statistic calculation"
and "Delete All" on the <Target Data Function> screen.
[Setting Procedure]
1. Use the or button of the cross key to select the
"All" tab, use the
"Data Protect", and then press the [OK/Edit] button.
The <Data Protect> screen is displayed.
2. Use the or button of the cross key to move the
cursor to the desired item.
Settings
 ON: Protect the data.
 OFF: Do not protect the data.
3. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Target> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Target Data Function>
screen without changing the setting.
Start the procedure from the <Target Data Function> screen.
or button to move the cursor to
2
E91