Konica Minolta cm-5 Instruction Manual page 133

5. Use the or and
to move the cursor around the characters and then
press the [OK/Edit] button.
The selected character is added to the text box.
6. Repeat Step 5 until you have entered the necessary
characters.
• The position where characters will be added can be changed
by using the or
cursor in the text box. The file name will then be modified
at the position of the cursor.
• To delete the character to the left of the cursor in the text
box, press the [CAL] button.
• The file name can be up to 20 characters long.
A USB keyboard can also be used to input file names. For
Memo
information on connecting a USB keyboard, refer to page
143 "Connecting a USB Keyboard".
7. When you are finished entering characters, press
[MENU] button, to move the cursor to "Save" and then
press the [OK/Edit] button.
The settings are confirmed and the screen returns to the
<Save Sample Data> screen.
If you press the [Back] button during the setting, "Do you
Memo
want to save the changes?" is displayed. When you place
the cursor on "OK" and press the [OK/Edit] button, the
setting details are confirmed and the screen returns to the
<Save Sample Data> screen. When you place the cursor
on "Cancel" and press the [OK/Edit] button, the setting
details are not changed and the screen returns to the <Save
Sample Data> screen.
8. To accept the displayed file name, use the
button of the cross key to move the cursor to
Sample Data" and then press the [OK/Edit] button.
• The <Saving...> screen is displayed.
• When the saving is complete, the screen returns to the
<Sample> detail screen.
When the file format is set to the CM-S100w format,
Memo
measured color difference data is saved along with set
values. For details regarding file format settings, refer to
page 141.
or buttons of the cross key
button of the cross key to position the
or
"Save
3
E131