Konica Minolta cm-5 Instruction Manual page 63

Measurement Area
When the measurement type is Reflectance or Petri Dish, select the measurement area.
[Setting Procedure]
1. Use the or button of the cross key to move the
cursor to "Meas. Area" and then press the [OK/Edit]
button.
The <Measurement Area Settings> screen is displayed.
2. Use the or button of the cross key to move the
cursor to the desired item.
Settings
 ø30 mm: Measurement area of 30 mm(LAV)
 ø8 mm: Measurement area of 8 mm (MAV); using the
optional ø8 mm Target Mask (CM-A195)
 ø3 mm: Measurement area of 3 mm (SAV); using the
optional ø3 mm Target Mask (CM-A196)
3. Press the [OK/Edit] button.
The selection is confirmed and the screen returns to the
<Measurement Condition Settings> screen.
If you press the [Back] button without pressing the [OK/
Notes
Edit] button, you return to the <Measurement Condition
Settings> screen without changing the setting.
Start the procedure from the <Measurement Condition Settings> screen.
2
E61