Konica Minolta cm-5 Instruction Manual page 32

<Reflectance measurement>
4. Use the or
key to move the cursor to
"Reflectance" and then press the
[OK/Edit] button.
The cursor moves to "Next".
5. Press the [OK/Edit] button.
6.
The <Measurement Area Selection>
screen appears.
Use the or
key to move the cursor to the desired
measurement area and then press
the [OK/Edit] button.
The cursor moves to "Next".
7. Press the [OK/Edit] button.
8.
The <Target Mask Setting> screen
appears.
9. Attach the Target Mask for the size
of the measurement area selected.
10. Check that the cursor is on "Next",
and press the [OK/Edit] button.
E30
button of the cross
button of the cross
Memo
For the procedure of attaching
the Target Mask, refer to page
42.