Sample=>Target - Konica Minolta cm-5 Instruction Manual

Sample=>Target
Set sample data as target color data.
[Operating Procedure]
Unlike measured data, the numbers assigned to target color data do not change automatically. When you measure
Notes
colors continuously to set target colors, you need to move the cursor manually to set each data.
1. Use the or button of the cross key to select the
"Current" tab, use the
cursor to "Sample=>Target", and then press the [OK/
Edit] button.
The "Target List" screen appears.
2. The target color data number being used will be
highlighted. Use the
move to a desired target color No., and then press the
[OK/Edit] button. When the target color data is set, the
screen returns to the <Sample> screen.
If you selected a number to which target color data has
Notes
already been set, a message is displayed to confirm
overwriting.
Start the procedure from the <Sample Data Function> screen.
or button to move the
or button of the cross key to
3
E129