Saving The Current Sample Data To A Usb Memory Device - Konica Minolta cm-5 Instruction Manual

Saving the Current Sample Data to a USB Memory Device

Save the current sample data to a USB memory device.
The USB memory device must be connected to the instrument before saving the data. For information on
connecting a USB memory device, refer to page 141 "Connecting a USB Memory".
[Operating Procedure]
2. Use the or button of the cross key to select the
"Current" tab, use the
cursor to "Save", and then press the [OK/Edit] button.
3.
The <Save Sample Data> screen is displayed with a
suggested file name shown.
To change the file name, use the
cross key to move the cursor to the current file name
and then press the [OK/Edit] button.
4.
The <Edit File Name > screen is displayed.
Use the and buttons of the cross key to move the
cursor around the characters and then press the [OK/
Edit] button.
The selected character is added to the text box.
A USB keyboard can also be used to input file names. For
Memo
information on connecting a USB keyboard, refer to page
143 "Connecting a USB Keyboard".
5. Repeat Step 3 until you have entered the necessary
characters.
• The position where characters will be added can be changed
by using the or
the cursor in the text box. The file name will then be
modified at the position of the cursor.
• To delete the character to the left of the cursor in the text
box, press the [CAL] button.
• The file name can be up to 20 characters long.
Start the procedure from the <Sample Data Function> screen
or button to move the
or button of the
button of the cross key to position
3
E123