Setting A Specimen; Reflectance Measurement - Konica Minolta cm-5 Instruction Manual

Setting a specimen

Reflectance measurement

To use the instrument for reflectance measurement of specimens other than powder or paste, attach the Target
Mask to the specimen measuring port and set a specimen on it. The Target Mask can be selected from three
types based on the illumination area (specimen measuring port size): ø30 mm, ø8 mm and ø3 mm, depending on
the specimen and application.
When taking reflectance measurements, make sure that there is no object in the transmittance specimen chamber.
Notes
Required accessory
Target Mask: ø30 mm
CM-A197
For LAV
Do not touch the inside (edge) of the Target Masks with your
Notes
fingers. If it becomes dirty, wipe it with a soft, clean dry cloth.
Attaching the Target Mask to the instrument
1. Align the Target Mask with the positioning groove on
the instrument and push the mask in.
E42
Target Mask: ø8 mm
CM-A196 (Optional)
For MAV
Target Mask: ø3 mm
CM-A195 (Optional)
For SAV
Edge
Holding example 1
Holding example 2