Konica Minolta cm-5 Instruction Manual page 82

5. When you are finished entering
characters, press [MENU] button,
move the cursor to "Save" and then
press the [OK/Edit] button.
The settings are confirmed and the screen
returns to the <Save Target Data>
screen.
If you press the [Back] button
Memo
during the setting, "Do you want to
save the changes?" is displayed. If
you then place the cursor on "OK"
and press the [OK/Edit] button, the
setting details are confirmed and the
screen returns to the <Save Target
Data> screen; if you place the
cursor on "Cancel" and press the
[OK/Edit] button, the setting
details are not changed and the
screen returns to the <Save Target
Data> screen.
6. Verify that a USB memory device is
connected. To accept the displayed file
name, use the
cross key to move the cursor to  and
then press the [OK/Edit] button.
The <Saving...> screen is displayed.
When the saving is complete, the screen
returns to the <Target> detail screen.
Performing Statistical Calculations on Target Data
Performs statistical data on target data stored in the instrument. The data to be used for calculations can be
selected in a list screen. After calculations have been performed, the average of the targets selected for statistical
calculations can be saved.
To save the average as a new target data, be sure to select a target color No. for which no data has been set before
proceeding. If this procedure is performed when a target color No. which already contains target color data, the
existing target color data will be overwritten when save is performed.
1. Use the or
key to select the "Current" tab, use
the or button to move the
cursor to "Statistic calculation", and
then press the [OK/Edit] button.
E80
or button of the
button of the cross
Memo
The USB memory device must
be connected to the instrument
before saving the condition file
to a USB memory device. For
information on connecting a
USB memory device, refer to
page 141 "Connecting a USB
Memory".