Specimen Viewing Mirror (Optional) - Konica Minolta cm-5 Instruction Manual

Specimen Viewing Mirror (Optional)

The Specimen Viewing Mirror allows you to check the measurement points for a specimen when using the
instrument for reflectance measurement.
How to use the Specimen Viewing Mirror
1. Place a specimen on the Target Mask.
2. Open the Transmittance Specimen Chamber Cover and
set the Specimen Viewing Mirror on the Chamber.
3. Open the shutter.
For the procedure of opening/closing the shutter, refer to page
66.
4. Look into the Specimen Viewing Mirror from the Top
and adjust the position of the specimen.
5. Close the shutter.
For the procedure of opening/closing the shutter, refer to page
66.
6. Remove the Specimen Viewing Mirror and close the
Transmittance Specimen Chamber Cover.
Specimen
2
Specimen
Viewing
Mirror
Shutter
Specimen
Viewing
Mirror
Shutter
E47