Safety Symbols - Konica Minolta cm-5 Instruction Manual

Safety Symbols

The following symbols are used in this manual to prevent accidents which may occur as a result of incorrect use of
the instrument.
Denotes an instruction regarding a safety warning or note.
Read the instruction carefully to ensure safe and correct use.
Denotes an instruction regarding the risk of electric shock.
Read the instruction carefully to ensure safe and correct use.
Denotes an instruction regarding the risk of fire.
Read the instruction carefully to ensure safe and correct use.
Denotes a prohibited operation.
This operation must never be performed.
Denotes an instruction.
This instruction must be strictly adhered to.
Denotes a prohibited operation.
Never disassemble the instrument.
Denotes an instruction.
Be sure to disconnect the AC adapter from the AC outlet.
This symbol indicates A.C.
This symbol indicates D.C.
This symbol indicates class II protection against electric shock.
Trademarks
• Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
®
Notes on this Manual
• Copying or reproduction of all or part of the contents of this manual without the permission of KONICA
MINOLTA is strictly prohibited.
• The contents of this manual are subject to change without prior notice.
• Every effort has been made in the preparation of this manual to ensure the accuracy of its contents.
• However, should you have any questions or find any errors, please contact your retailer or a KONICA MINOLTA-
authorized service facility.
• KONICA MINOLTA will not accept any responsibility for consequences arising from the use of the instrument.