Safety Precautions - Konica Minolta cm-5 Instruction Manual

Safety Precautions

To ensure correct use of this instrument, read the following points carefully and adhere to them.
After you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.
WARNING
Do not use the instrument in places where
flammable or combustible gases (gasoline
etc.) are present.Doing so may cause a fire.
Always use the AC adapter supplied as a
standard accessory or the optional AC
adapter, and connect it to an AC outlet of
the rated voltage and frequency. If an AC
adapter other than those specified by
KONICA MINOLTA is used, it may result
in damage to the unit, fire or electric
shock.
If the instrument will not be used for a
long time, disconnect the AC adapter plug
from the AC outlet. Accumulated dirt or
water on the prongs of the AC adapter's
plug may cause a fire and should be
removed.
Do not forcibly bend, twist, or pull the AC
adapter power cable. Do not scratch or
alter the power cable or place heavy
objects on it. Doing so may damage the
power cable and cause a fire or electric
shock.
Insert the power plug fully and securely.
Incomplete insertion may cause fire or
electric shock.
CAUTION
Do not perform measurement with the
specimen measuring port directed towards
your eyes. Doing so may damage your
eyes.
Be careful not to get your hand caught in
the openable section of the instrument.
Doing so may result in injury.
When cleaning, unplug the power plug.
Leaving it plugged in may cause electric
shock.
(Failure to adhere to the following points may result in death or serious
injury.)
(Failing to adhere to the following points may result in injury or damage
to the instrument or other property.)
Do not disassemble or modify the
instrument or the AC adapter. Doing so
may cause a fire or electric shock.
Take special care not to allow liquid or
metal objects to enter the instrument and
the AC adapter. Doing so may cause a fire
or electric shock. Should liquid or metal
objects enter the instrument, turn the
power OFF immediately, disconnect the
AC adapter plug from the AC outlet, and
contact the nearest KONICA MINOLTA-
authorized service facility.
The instrument should not be operated if it
is damaged or the AC adapter is damaged,
or if smoke or odd smells occur. Doing so
may cause a fire. In such situations, turn
the power OFF immediately, disconnect
the AC adapter plug from the AC outlet
and contact the nearest KONICA
MINOLTA-authorized service facility.
Always hold the plug itself when
disconnecting the AC adapter plug from
the AC outlet. Pulling on the power cable
may damage it and cause a fire or electric
shock.
Do not insert or disconnect the AC adapter
plug from an AC outlet with wet hands.
Doing so may cause electric shock.
Do not place the instrument on an unstable
or sloping surface.Doing so may result in
its dropping or overturning, causing injury.
Be careful not to drop the instrument when
carrying it.
Make sure that the AC outlet is located
near the instrument and that the AC
adapter plug can be connected to and
disconnected from the AC outlet easily.
E1