Eap Mode - SATO CL4NX Operator's Manual

4 Operation and Configuration
EAP Conf.
Interface > Network > Settings > Wi-Fi > EAP Conf.
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf.
Set the functions for EAP.
Shows only if you have selected an item other than Personal (PSK) in the
WPA Authentication menu or if you have selected Dynamic WEP in the
Security menu.
The setting items are as follows:
1

EAP Mode

2 Inner Method
3 Username
4 Password
5 Anon. Outer ID
6 Verify Server Cert.
7 Private Key P/W
8 PAC Auto
Provisioning
9 PAC P/W
EAP Mode
Interface > Network > Settings > Wi-Fi > EAP Conf. > EAP Mode
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. >
EAP Mode
Set the EAP Mode (authentication mode).
The options are as follows:
• FAST
• LEAP
• PEAP
• TLS
• TTLS
128
CL4NX/CL6NX Operator Manual
Set the EAP Mode (authentication mode).
Set the inner method.
*Shows only if you have selected FAST, PEAP
or TTLS in the EAP Mode menu.
Set the user name.
Set the password.
Set the external ID.
*Shows only if you have selected FAST, PEAP
or TTLS in the EAP Mode menu.
Enable or disable server authentication.
*Shows only if you have selected anything
other than LEAP in the EAP Mode menu.
Set the Private Key password.
*Shows only if you have selected TLS in either
the EAP Mode menu or Inner Method menu.
Enable or disable PAC Auto Provisioning.
*Shows only if you have selected FAST in the
EAP Mode menu.
Set the PAC password.
*Shows only if you have selected FAST in the
EAP Mode menu and if you have selected
Disabled in PAC Auto Provisioning.