SATO CL4NX Operator's Manual page 185

Compatible
Applications > SBPL > Compatible
Set the compatible code for SBPL.
The setting items are as follows:
1 M-8400
Compatibility
2 CODE128(C)
Zero Fill
3 Kanji Command
4 Call Font/Logo
5 ENQ Reply Delay
6 ENQ Reply Cycle
M-8400 Compatibility
Applications > SBPL > Compatible > M-8400 Compatibility
Enable or disable the M-8400 printer compatibility function.
The options are as follows:
• Enabled: Enable the M-8400 printer compatibility function.
• Disabled: Disable the M-8400 printer compatibility function.
Note
• Contact your SATO sales representative for more information about the
M-8400 printer compatibility function.
• If M-8400 Compatibility is set to Enabled, CODE128(C) Zero Fill is
automatically enabled and the setting item does not show.
Enable or disable the M-8400 printer
compatibility function.
Set whether to allow odd digits and print the
barcode with zero-filling when start code C is
used in CODE128.
*If M-8400 Compatibility is set to Enabled,
this setting is automatically enabled and does
not show.
Set the printer behavior when the received data
includes the Kanji command ESC+K5,
ESC+K6 or ESC+K7.
Set how to process the character code
specified in Recall font & logo command
(ESC+RF).
Set the period to delay status reply to status
request ENQ.
Set the interval for the status reply cycle to
status request ENQ.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
183