3rd Byte Code
Applications > STCL > Command Head > 3rd Byte Code
Set the third byte code.
You can change the code only if you have selected Custom in the Control
Code menu.
The setting range is from 0 to 255.
Font Settings
Applications > STCL > Font Settings
Set the font.
The setting items are as follows:
1
Zero Slash
2
€
3
Code Page
4
Half-width Symbol
Zero Slash
Applications > STCL > Font Settings > Zero Slash
Set whether to print the number zero (0) with or without a slash (/).
The options are as follows:
• Enabled: Print zero with a slash.
• Disabled: Print zero without a slash.
€
Applications > STCL > Font Settings > €
Set the European currency symbol to a hex code.
The setting range is from 00 to ff (hexadecimal).
Set the type for printing zero.
Set the European currency symbol to a hex
code.
Set the code page to be used.
Set whether to print symbols with half-width
characters.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
191