Doing A Test Read With The Barcode Checker - SATO CL4NX Operator's Manual

7 Appendix
7.6.4

Doing a Test Read with the Barcode Checker

Prepare a label on which the barcode data you use is printed by this printer.
After performing operational settings of the barcode checker and then connecting it to the printer,
perform a test read from the printer's Settings menu to confirm that the barcode checker functions
correctly.
1
After connecting the barcode checker,
press the
operator panel until the LED lights up in
blue to power on the printer.
CAUTION
When the barcode checker is powered on, it emits a
laser light for a few seconds. Be sure to keep the laser
away from your eyes.
Once the connection between the printer and the
barcode checker is complete, the barcode checker
icon appears on the status bar of the display.
2
When the printer is in online mode, press
the button on the operator panel to
change to offline mode.
3
Press the
menu.
342
CL4NX/CL6NX Operator Manual
power button on the
button to show the Settings