SATO CL4NX Operator's Manual page 355

Model
Sensors
I-mark
(Reflective Type)
Gap
(Transmissive Type)
Head Open
Paper End Sensor
Label Near End
Ribbon End/
Ribbon Near End
Dispenser
Cutter
CL4NX
Position and sensitivity: Adjustable
Position and sensitivity: Adjustable
Fixed
Detect with I-mark sensor or Gap sensor
Fixed
* This feature is supported on printers from serial number 6B~ and above.
Fixed
Fixed
* If linerless cutter kit or dispenser unit
is installed.
Fixed
* If cutter unit or linerless cutter kit is
installed.
CL6NX
Fixed
* If dispenser unit is installed.
Fixed
* If cutter unit is installed.
CL4NX/CL6NX Operator Manual
7 Appendix
353