SATO CL4NX Operator's Manual page 139

Time Server IP
Interface > Network > Services > NTP > Time Server IP
Set the IP address of the NTP server.
The setting range is from 0.0.0.0 to 255.255.255.255.
The IP address should normally be set to 0.0.0.0 (the default) which
means that global NTP servers will be assigned automatically. Set to a
valid IP if the time synchronization is requested for a specific server.
LPD
Interface > Network > Services > LPD
Set the functions for LPD.
The setting items are as follows:
1 Enable
2 DNS Lookup
Enable
Interface > Network > Services > LPD > Enable
Enable or disable the LPD function.
The options are as follows:
• Enabled: Enable the LPD function.
• Disabled: Disable the LPD function.
DNS Lookup
Interface > Network > Services > LPD > DNS Lookup
Enable or disable the DNS Lookup function.
The options are as follows:
• Enabled: Enable the DNS Lookup function.
• Disabled: Disable the DNS Lookup function.
Enable or disable the LPD function.
Enable or disable the DNS Lookup function.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
137