SATO CL4NX Operator's Manual page 171

View
Interface > RFID > View
Shows the data of the RFID tag.
Press the button to change to the Memory Bank screen.
Press the right soft button (READ) to change to the Data Reading screen,
to read and show the data.
On the Data Reading screen, you can press the right soft button to feed
the media and attempt to read the tag currently set in the printer.
Memory Bank
Interface > RFID > View > Memory Bank
Set the memory area of the RFID tag to read.
The readable memory areas are as follows:
If the installed module is UHF
• EPC: EPC area
• TID: TID area
• USER: USER area
• PC: PC/AFI area
If the installed module is HF
• USER: USER area
• UID: UID area
Retry Mode
Interface > RFID > Retry Mode
Set whether to retry encoding of failed data when an RFID tag error
occurs.
The options are as follows:
• Retry: The printer will continue to attempt encoding the same data.
However, if you have set the Retries to 0, the RFID error screen shows
and printing continues.
• Release: Deletes the current print job, allowing the printer to move on
to the next print job. If the RFID error occurs continuously and reaches
the maximum number of Retries, printing stops.
4 Operation and Configuration
U
HF
U
HF
U
HF
CL4NX/CL6NX Operator Manual
H
F
H
F
H
F
169