SATO CL4NX Operator's Manual page 186

4 Operation and Configuration
CODE128(C) Zero Fill
Applications > SBPL > Compatible > CODE128(C) Zero Fill
Set whether to allow odd digits and print the barcode with zero-filling in
case start code C is used in CODE128.
If M-8400 Compatibility is set to Enabled, this setting is automatically
enabled and does not show.
The options are as follows:
• Enabled: Allow odd digits and print the barcode with zero-filling.
• Disabled: Do not allow odd digits. A command error occurs and the
barcode will not be printed.
Kanji Command
Applications > SBPL > Compatible > Kanji Command
Set the printer behavior when the received data includes the Kanji
command ESC+K5, ESC+K6 or ESC+K7.
The options are as follows:
• Enabled: Change the Kanji commands ESC+K5, ESC+K6 and
ESC+K7 in the received data to the proper commands and print.
ESC+K5: 16x16 dots Kanji in horizontal line with 1-byte character
ESC+K6: 24x24 dots Kanji in horizontal line with 1-byte character
ESC+K7: 22x22 dots Kanji in horizontal line
• Disabled: Do not change the Kanji commands ESC+K5, ESC+K6 and
ESC+K7 in the received data. The printer behavior when it receives
these commands is as follows:
ESC+K5: Print with 40x40 dots Kanji in horizontal line.
ESC+K6: A command error occurs and the data will not be printed.
ESC+K7: A command error occurs and the data will not be printed.
Call Font/Logo
Applications > SBPL > Compatible > Call Font/Logo
Set how to process the character code specified in Recall font & logo
command (ESC+RF).
The options are as follows:
• Enabled: Character codes are processed in little-endian format.
• Disabled: Character codes are processed in big-endian format.
184
CL4NX/CL6NX Operator Manual