SATO CL4NX Operator's Manual page 140

4 Operation and Configuration
FTP
Interface > Network > Services > FTP
Set the functions for FTP.
The setting items are as follows:
1 Enable
2 FTP Timeout
Enable
Interface > Network > Services > FTP > Enable
Enable or disable the functions for FTP.
The options are as follows:
• Enabled: Enable the FTP function.
• Disabled: Disable the FTP function.
FTP Timeout
Interface > Network > Services > FTP > FTP Timeout
Set the connection timeout period between the printer's FTP server and
clients.
Specify the maximum number of seconds that the printer's FTP server will
allow clients to stay connected without receiving any data on either the
control or data connection.
The setting range is from 10 to 3600 seconds.
138
CL4NX/CL6NX Operator Manual
Enable or disable the functions for FTP.
Set the connection timeout period between the
printer's FTP server and clients.