SATO CL4NX Operator's Manual page 154

4 Operation and Configuration
Advanced
Interface > Network > Advanced
Set the advanced function for the interface.
The setting item is as follows:
1 ARP
Announcement
ARP Announcement
Interface > Network > Advanced > ARP Announcement
Set the functions for ARP announcement.
The ARP announcement is useful for updating other hosts mapping of a
hardware address when the IP address or MAC address of the sender has
changed.
The setting items are as follows:
1 Additional
2 Periodic
Additional
Interface > Network > Advanced > ARP Announcement > Additional
Set the additional ARP announcement.
The options are as follows:
• Enabled: Enable the additional ARP announcement. The ARP is sent
at 1, 2, 4, 8 and 16 seconds after the link up/DHCP assignment.
• Disabled: Disable the additional ARP announcement. The ARP is only
sent at 1 second after the link up/DHCP assignment.
Periodic
Interface > Network > Advanced > ARP Announcement > Periodic
Set the interval of the ARP announcement in the range of 0 to 600
seconds.
Initial setting: 0
152
CL4NX/CL6NX Operator Manual
Set the ARP announcement.
Enable or disable the additional ARP
announcement.
Set the periodic timing for ARP announcement.