SATO CL4NX Operator's Manual page 138

4 Operation and Configuration
BCC
Interface > Network > Services > Ports > BCC
Enable or disable the BCC check function.
Shows only if you have selected Status5 in the Flow Control menu.
The options are as follows:
• Enabled: Enable the BCC check function.
• Disabled: Disable the BCC check function.
NTP
Interface > Network > Services > NTP
Set the functions for NTP.
The NTP function gets the time information from the NTP server through
the network and sets the time of the printer.
The setting items are as follows:
1 Enable
2 Error
3 Time Server IP
Enable
Interface > Network > Services > NTP > Enable
Enable or disable the functions for NTP.
The options are as follows:
• Enabled: Enable the NTP function.
• Disabled: Disable the NTP function.
Error
Interface > Network > Services > NTP > Error
Set to show the NTP error message if detected.
The options are as follows:
• Enabled: Shows the error message.
• Disabled: Do not show the error message.
136
CL4NX/CL6NX Operator Manual
Enable or disable the functions for NTP.
Set to show the NTP error message if detected.
Set the IP address of the NTP server.