Media Sensor Positions And Media Stop Positions - SATO CL4NX Operator's Manual

7 Appendix
7.2 Media Sensor Positions and Media Stop
Positions
The media stop positions with the media sensor and various operation modes are as follows:
316
CL4NX/CL6NX Operator Manual
Media stop position in dispenser mode
Media stop position in cutter mode
Media stop position in tear-off mode
Print head
Gap sensor I-mark sensor
23.5 mm
(0.9")
20.3 mm
(0.8")
19.0 mm
(0.7")
61.8 mm
(2.4")
<CL4NX>
6.3 mm ~ 59.6 mm (0.2" ~ 2.3")
RFID mode: 0.3 mm ~ 53.6 mm (0.01" ~ 2.1")
<CL6NX>
8.0 mm ~ 73.0 mm (0.32" ~ 2.9")
<CL4NX>
13.3 mm ~ 66.6 mm (0.5" ~ 2.6")
RFID mode: 7.3 mm ~ 60.6 mm (0.3" ~ 2.4")
<CL6NX>
25.0 mm ~ 90.0 mm (1.0" ~ 3.5")
Frame