Wireless Lan Interface - SATO CL4NX Operator's Manual

7 Appendix
7.8.8

Wireless LAN Interface

This interface complies with the IEEE802.11a/b/g/n standard.
CAUTION
Before using wireless LAN near medical devices and facilities, consult your system administrator.
Basic Specifications
Protocol
IP Address
Subnet Mask
Gateway Address
Data Transfer Method
Frequency Band
Communication Channel
SSID
Authentication
Encryption
Communication Mode
380
CL4NX/CL6NX Operator Manual
Status3, Status4, Status5
IPv4
IPv6
IPv4
IPv6
IPv4
IPv6
802.11a: max 54 Mbps
802.11n: max 135 Mbps
802.11b: max 11 Mbps
802.11g: max 54 Mbps
Note
These are the logical values based on the wireless LAN specifications and
are not the actual data transfer speeds.
2.4 GHz (2.412 to 2.485 GHz)
5 GHz
The number of channels you can set varies depending on the region
where you use the printer.
Any alphanumeric character (maximum 32)
Open System
Shared Key
WPA/WPA2
Perform the RADIUS server authentication using 802.1x (EAP-TLS, LEAP,
EAP-TTLS, EAP-PEAP, EAP-FAST protocol)
None
WEP (64 bits/128 bits)
AES (WPA-PSK/WPA2-PSK, WPA-802.1x/WPA2-802.1x authentication)
Infrastructure
Ad Hoc