SATO CL4NX Operator's Manual page 201

Format Attribute
Applications > SDPL > Format Attribute
Set the format attribute.
You can change this setting only if you have selected Settings in the
Prioritize > Format Attribute menu.
The options are as follows:
• XOR
• Transparent
• Opaque
• Inverse
Pause Mode
Applications > SDPL > Pause Mode
Enable or disable the pause mode.
You can change this setting only if you have selected Settings in the
Prioritize > Pause Mode menu.
The options are as follows:
• Enabled: Enable the pause mode.
• Disabled: Disable the pause mode.
1 Byte Codepage
Applications > SDPL > 1 Byte Codepage
Select the code page to be used for 1 byte characters from the list.
You can change this setting only if you have selected Settings in the
Prioritize > 1 Byte Codepage menu.
SDPL Measure Unit
Applications > SDPL > SDPL Measure Unit
Set the measurement unit.
You can change this setting only if you have selected Settings in the
Prioritize > SDPL Measure Unit menu.
The options are as follows:
• Inch
• Millimeter
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
199