Usable Media; Adjusting The Position Of The Media Sensor - SATO CL4NX Operator's Manual

3 Loading the Ribbon and Media

3.4 Usable Media

This printer can print on two types of media; media roll and fan-fold media. The printer uses media
sensors to detect I-marks or Gaps on the media in order to precisely print the content.
1.5 mm (0.06")
3 mm
(0.12")
I-mark label
3.4.1

Adjusting the Position of the Media Sensor

When you use nonstandard media (for example, media with printing on the underside, or media with a
special shape), the media sensor cannot sense the I-mark or Gap of the media correctly. In such a case,
adjust the position of the media sensor to sense the I-mark or Gap correctly.
Adjust the media sensor guide to the position where it
can sense the I-mark or Gap of the media.
The I-mark sensor is below the
sensor is below the
42
CL4NX/CL6NX Operator Manual
1.5 mm (0.06")
3 mm
(0.12")
14 mm
(0.55")
mark, and the Gap
mark.
3 mm
(0.12")
Gap label
3 mm (0.12")
14 mm
(0.55")
I-mark journal paper/
linerless label (CL4NX only)