SATO CL4NX Operator's Manual page 166

4 Operation and Configuration
Inputs
Interface > External I/O > Signals > Inputs
Set the input pin No. of the Signal Print Start/Signal Reprint.
/
Press the
then press the
Press the button to save the settings and return to the Signals menu.
The setting items are as follows:
1 Start Print
2 Reprint
Note
You cannot set any inputs using the same pin number. If you attempt to set
the same number, the settings will show in red and you cannot save the
settings.
164
CL4NX/CL6NX Operator Manual
buttons to highlight the item that you want to change,
/
buttons to change the pin No.
Set the input pin No. of the Signal Print Start.
The options are as follows:
• PIN 5: Set the Signal Print Start to pin 5.
• PIN 7: Set the Signal Print Start to pin 7.
Set the input pin No. of the Signal Reprint.
The options are as follows:
• PIN 5: Set the Signal Reprint to pin 5.
• PIN 7: Set the Signal Reprint to pin 7.