SATO CL4NX Operator's Manual page 46

3 Loading the Ribbon and Media
3
Pull the media holder guide q and media
guide w away from the printer.
Turn the knob
media guide.
4
Load the media in the media holder r.
Make sure that the media roll is all the way
in to inside of the printer.
5
Push the media holder guide q lightly
against the media roll.
6
Pass the media below the media damper
t and media sensor guide y while
pushing the media to inside of the printer.
Make sure that the end of the media extends out the
front of the printer.
44
CL4NX/CL6NX Operator Manual
e counterclockwise to release the
1
6
5
3
2
1
4