SATO CL4NX Operator's Manual page 284

6 Troubleshooting
Error
No.
Barcode reading error
1078
Barcode reading error (checking
start position abnormality)
1079
Barcode comparison error
1080
282
CL4NX/CL6NX Operator Manual
Message
Could not read the barcode
normally.
To clear the error:
Press the Offline
or Cancel button.
•Press the Offline
button to change
to offline mode
while keeping the
print job.
•Press the Cancel
button to cancel
the print job and
change to offline
mode.
A value larger than the loaded
media length is specified for
checking start position.
To clear the error:
Press the Offline
button. The
printer changes to
offline mode while
keeping the print
job.
The read result of the barcode
does not match the print data.
To clear the error:
Press the Offline
or Cancel button.
•Press the Offline
button to change
to offline mode
while keeping the
print job.
•Press the Cancel
button to cancel
the print job and
change to offline
mode.
Cause
Check the layout for printing.
Check the position of the
barcode checker and settings.
Check the layout for printing.
Set a value smaller than the
loaded media length for
checking start position.
Check the layout for printing
and barcode checker settings.
Countermeasure